Why xTool D1 Air Assist Set?
Blowing away hot smoke when cutting materials, reduce the temperature, and cut more clean and smooth.
Protect the laser lens
The xTool air assist device blows away acceptable debris and smoke generated by the laser head operation, protecting the laser head lens from contamination and extending the life of the laser head.
Guaranteed clean surface
It uses air to quickly reduce the temperature of the cut material surface, preventing distortion and discoloration due to high temperatures, ensuring smooth lines,complete patterns, and clean material surfaces.
Steady output power of 30L/min
Large and stable wind, with a steady output power of 30L/min, effectively removes smoke and ensures laser energy stability.
Low working noise
The noise of the air-assist unit when working is 40 decibels, which is lower than the working sound of the fan. The air assist unit can provide you with a quiet laser engraving environment.
Get Inspired
Notice for xTool D1 Users
To match D1 and the air pump, extra parts below should be set up to your D1.
About D1 Pro, it matches well with the air pump; no extra parts are needed.
Specs
| Dimension | Data |
|---|---|
| Package Size (LWH) | 265*192*156mm |
| Product Size (LWH) | 120.2*127.8*61.5mm |
| Product Weight | ca.1200g |
| Weight with Package | ca.1800g |
| Air Flow | 25-30L/min |
| Air Pressure | 30kpa |
| Power | 17W/16W |
| Voltage | 110V/220V-230V |
Specification
| Compatible with | xTool D1 5W/ 10W & xTool D1 Pro |
|---|---|
| Power supply voltage | 110V/220V |
| Air output | 30 L/min |
| Rated power | 17W |