xTool Fire Safety Set: Auto Fire Detection, Fire Extinguishing

Triggered Fire when
Process Ignited Materials

Mishandling the Machine
and Caught On Fire

Don't Know How to
Safely Put Out Fire

Work with Toxic Fire
Extinguish Chemicals

Fire accidents triggered by laser has been the concern of the whole industry. 

As one of the leading companies in laser industry, xTool is fully aware of your concerns and decides to be the pioneer in minimizing the possibility of Laser-Triggered Fire. Thus, we have brought this to the industry:

Full Auto Fire
Safety Set for
Desktop Laser

For Fire Detection & Alarm

Control Box

Sensor Hub

Sensors 

For Fire Suppression & Power Cut

Control Box

Gas Bottle

Air Tube

Smart Switch

* This product must be used in a enclosed space. For example, xTool D1 series need to be used with xTool Enclosure.

Smart Fire
Detection & Alarm System

Auto Flame Detection

By using 5 fire detection sensors and integrated algorithms of light, temperature, and position inside the enclosed laser, xTool Fire Safety set is sensitive to any possible dangers of fire.

Auto Alarm Triggering

Immediately after it detects fire, xTool Fire Safety Set will automatically trigger the alarm, warning users of the fire by continuous "beeping" sounds. You can stop the alarm by pushing a button on it, if you want to deal with the fire in your own way.

Auto Power Cut

To prevent further exacerbating the burning fire and protect the laser machine from fire, the smart switch of the xTool Fire Safety Set will shut down the working laser automatically in a few seconds after the alarm sounds.

Auto Fire Extinguishing 

After seconds of alarming, xTool Fire Safety Set will automatically release the CO2 gas into the enclosed laser and quench the fire with non-toxic and odorless fumes, preventing the laser machine from further damage and leaving a clean laser workspace afterwards.

*Noted that xTool Fire Safety Set cannot guarantee 100% safety in fire accidents. Please use the laser machine accordingto its guide and do not leave the machine during processing

Wide Range of Compatibility 

Apply to all lasers that is in < 0.13 m3 enclosed space 

Open Machine with an Enclosure

Use a cover to keep the working space enclosed. As long as the enclosed space is under 0.13m3, xTool Fire Safety Set can extinguish the fire effectively.

Enclosed Machine

Enclosed machine that has the working space up to 0.13m3 can work with xTool Fire Safety Set. (Be aware that an air tube is needed to put into the enclosed space for it to work)

Part List

Control Box

Sensor hub

Sensor 1

Sensor 2 *4

CO2 gas bottle *4

Smart switch

Tube

Tube clamp

Cable tie pack

3M tape

Power adapter & cable

Cable clamp